Fine Fix Fail Boat Checks

Visual inspection of fenders. At least three fenders on dock side and two fenders on the opposite

All lines secure including bow, stern and mid-ship springs. Check all lines securely fastened to cleats

Check shore power is connected to dock and that switches are on and breakers in "On" position. Ensure vessel is charging when onboard

Check tender is correct mounted/stowed and inflated. Check for bung and drain is open. Check Outboard is secure and red laynard is not installed

Check spare tender fuel is present and refill as necessary. Check spare gas bottles are present and full.

Check that the anchor is correctly set on the bow and adequately secured. The anchor must not be ramped hard against the bow roller. Check the anchor is clean. Check that the snubbing rope and/or bridle are stowed nearby.

Check for correct entry and any items logged by owners that haven't been reported. Update Active Issues register with any known items resolved or pending

Ensure shore power is connected, battery charge is turned on and that battery condition is at 100% or charging

Check switches are in correct positions. Fridges and bilge pumps on etc.....

Inspect bilges for signs of water ingress. Check for oil leaks. Run bilge pumps on manual for 5-10 seconds to verify operation.

Check engine oil level. Check coolant level and header tank is 50 percent